Friday, 4 September 2015

Car maintenance! Contd.

Contd.

Brake and clutch fluid

On most modern cars you can see the brake and clutch fluid levels through the transparent plastic reservoirs fitted to the master cylinders. Otherwise, remove the cap and check the level inside the reservoir.

The level should be maintained between the maximum and minimum marks.

Do not open the reservoir unnecessarily as brake fluid absorbs moisture from the air. Avoid contaminating the fluid by wiping dirt away from the cap area before removing. Only top the reservoir up with new brake fluid of the correct grade. If constant topping up is required, it may indicate a leak. Have your mechanic check it immediately.

Brake fluid will damage paint work very quickly so wash spills off with plenty of clean water straight away.

No comments:

Post a Comment